Forum posts to 'Archive'

Re: remove javscript from front end

LeeUmm — Tue, 16 Dec 2008 09:46:55 +1300

Requirements::block('/path/to/js'); should work.

Posted to: remove javscript from front end Show Thread | Post Reply

remove javscript from front end

erwanpia — Tue, 16 Dec 2008 09:34:23 +1300

Hi, I want to use jquery on the front end but prototype is interfereing

the following in page controller does not remove the javascripts, how can I remove them ? thanks

Requirements::clear_combined_files();
Requirements::clear();

Posted to: remove javscript from front end Show Thread | Post Reply

Re: Image Gallery Extension: Testers Needed

Joshuar — Tue, 16 Dec 2008 09:07:31 +1300

Had to take the weekend off - be at it today/tomorrow - thanks!

Posted to: Image Gallery Extension: Testers Needed Show Thread | Post Reply

Installing SilverStripe on Windows Vista and IIS Services

Mike Adkins — Tue, 16 Dec 2008 09:00:33 +1300

I am in need of a good CMS system that I can use as a development platform for work.

I need to first get the environment platform working on my develpment machine before migrating it to one of my servers running IIS.
The servers are running Windows Server 2003 Professional. My office development machine is running Windows XP Professional and my
development laptop is running Windows Vista.

For now I do most of my develpment work and testing on my Vista laptop so that is my starting point.

I hope to document the process and try to make it over the obsticals as I go. So this is the first obstical.

I have downloaded FastCGI to host PHP Applcations on IIS 7.0
I am running IIS Version 7.0 SP1 on my Vista Laptop.
I have installed the Update for Windows Vista (KB954946).
I have modified the php.ini per the installation instructions.

Now for the first problem. WHen setting up the Handler Mappings FastCgiModule is not available in the Module: dropdown box.
Should I select CGI instead? This does not seem to allow PHP to run under IIS.

Posted to: Installing SilverStripe on Windows Vista and IIS Services Show Thread | Post Reply

Problems with SecurityAdmin

Ciaguaro — Tue, 16 Dec 2008 07:37:10 +1300

I installed 2.3.0-rc2 without any errors. Then I tried to access the Administrator group under Security admin. I got a alert box with an error message to big to see on my 13.3" screen. Then I tried to create a new group and got the same alert box. I reloaded and got this this. Is this a bug or something on my machine? Any clues?

Posted to: Problems with SecurityAdmin Show Thread | Post Reply

Re: New 2.3 documentation available

Ciaguaro — Tue, 16 Dec 2008 07:26:55 +1300

Thanks, I really looking forward to a stable 2.3. I love what I've seen so far!

Posted to: New 2.3 documentation available Show Thread | Post Reply

How to dynamically populate dropdownfield2 in popup based on selection of dropdownfield1?

t_agga — Tue, 16 Dec 2008 06:23:42 +1300

Hi guys,

Apart from other fields, I have two dropdownfields in my Popup. I managed to get them populated with data. However, as there is a one-to-many relationship between them, I would like the second combo to be dynamically populated with the data specific to the first one. At the moment I get all the values in a second combo regardless of combo1. Is there a way to do it? And how can I find out if the state of the dropdownfield has been changed and how can I get the value?
I spent days on silverstripe doc, trying to find the answer but no luck.
Thank you in advance.

Posted to: How to dynamically populate dropdownfield2 in popup based on selection of dropdownfield1? Show Thread | Post Reply

ImageEditor

NoahTall — Tue, 16 Dec 2008 06:06:01 +1300

I was unable to get the ImageEditor to work at all, because of a 'mod_rewrite' permissions issue, so I contacted my server. After several attempts, they managed to find a problem and fixed it for me, and one of the solutions they used was to 'whitelist' me on a mod_rewrite list, this is at hostgator.com..

Once I click on an image in Files & Images, it opens the 'lightbox' window, and I used to get the forbidden/permissions error once I clicked on the 'edit this image' link in that box..

Now it works, and it opens a bigger lightbox and just hangs up while attempting to 'load' the photo..along with a couple of 'spinning' images at the bottom of page..I dissected the code a bit by viewing source, and I can take urls out of the source and they work (meaning the show the image it was attempting to load)..

The entire rest of the cms seems to work just fine, and unless I can fix this, I have to start over, and I have already put alot of time and work into silverstripe..

Any help, would be so very much appreciated, thank you!

NoahTall

Posted to: ImageEditor Show Thread | Post Reply

Re: version 2.3.0 rc1 - VirtualPage website error

chrschn — Tue, 16 Dec 2008 05:37:17 +1300

I get the same error in 2.3.0 rc2:

[Notice] Trying to get property of non-object
GET /forschung-31/
Line 150 in /srv/www/ss_sec/silverstripe-v2.3.0-rc2/sapphire/core/model/VirtualPage.php
Source
141 }
142
143 /**
144 * When the virtualpage is loaded, check to see if the versions are the same
145 * if not, reload the content.
146 * NOTE: Virtual page must have a container object of subclass of sitetree.
147 * We can't load the content without an ID or record to copy it from.
148 */
149 function init(){
150 if($this->record->ID){
151 if($this->record->VersionID != $this->failover->CopyContentFrom()->Version){
152 $this->reloadContent();
153 $this->VersionID = $this->failover->CopyContentFrom()->VersionID;
154 }
155 }
156 parent::init();

Trace
VirtualPage_Controller->init()
Line 113 of Controller.php
Controller->handleRequest(HTTPRequest)
Line 19 of ModelAsController.php
ModelAsController->handleRequest(HTTPRequest)
Line 257 of Director.php
Director::handleRequest(HTTPRequest,Session)
Line 106 of Director.php
Director::direct(forschung-31/)
Line 111 of main.php

Posted to: version 2.3.0 rc1 - VirtualPage website error Show Thread | Post Reply

Re: Image Gallery Extension: Testers Needed

UncleCheese — Tue, 16 Dec 2008 05:24:00 +1300

Apparently send_warnings_to and log_errors_to are not valid methods of the Debug class? Can you remove those and just keep send_errors_to ?

Posted to: Image Gallery Extension: Testers Needed Show Thread | Post Reply

Cannot create folders in Assets (sudden problem)

Fuzz10 — Tue, 16 Dec 2008 05:23:56 +1300

All of a sudden , it is impossible to create new directories within the Assets dir by using "files and images" ....

The file / directory rights are okay (the apache user has full read/write rights) , and it _is_ possible to add files or rename already existing directories. I can also delete existing dirs.

Silverstripe does not produce an error; it just kinda' hangs (ajax process never stops)....

This is a big problem for us, since it impairs my clients work bigtime...

Anyone experienced this before ?

Posted to: Cannot create folders in Assets (sudden problem) Show Thread | Post Reply

Re: Image Gallery Extension: Testers Needed

SalvaStripe — Tue, 16 Dec 2008 05:18:46 +1300

i'm already here a few minutes..

i put
Debug::send_errors_to("my@email.com");
Debug::send_warnings_to("my@email.com");
Debug::log_errors_to("");

into my mysite/_config.php

I get this with the second and third line:
Fatal error: Call to undefined method Debug::send_warnings_to() in /srv/www/vhosts/domain.com/httpdocs/mysite/_config.php on line xx
Fatal error: Call to undefined method Debug::log_errors_to() in /srv/www/vhosts/domain.com/httpdocs/mysite/_config.php on line xx

but the elementary line make no error. [Debug::send_errors_to("my@email.com");]
but i dont recieve an email when i do the db rebuild where it stops at ImageGallery :S

i tried to get an error report at mail, so i removed an " ; " in _config.php. The website shows the error, but i did not recieve an email..

so.. how can i help you to help me? cu tommorow

Posted to: Image Gallery Extension: Testers Needed Show Thread | Post Reply

Re: Image Gallery Extension: Testers Needed

UncleCheese — Tue, 16 Dec 2008 04:42:44 +1300

Great. Please let me know. Joshuar, how did things work out with you? Did that fix the problem?

Posted to: Image Gallery Extension: Testers Needed Show Thread | Post Reply

Re: Image Gallery Extension: Testers Needed

SalvaStripe — Tue, 16 Dec 2008 04:40:07 +1300

ah today i cant go on with it.
but tomorrow i do reply with error report!
cu

Posted to: Image Gallery Extension: Testers Needed Show Thread | Post Reply

Re: Image Gallery Extension: Testers Needed

UncleCheese — Tue, 16 Dec 2008 04:04:20 +1300

Is there any way you can crank up your error reporting so we get a readable PHP error on the build?

Posted to: Image Gallery Extension: Testers Needed Show Thread | Post Reply

Re: Image Gallery Extension: Testers Needed

SalvaStripe — Tue, 16 Dec 2008 03:59:56 +1300

hey, i have a problem..

when i upload your
- image_gallery
- sortable_dataobject
- swfupload
- __MACOSX

folders in my SS root directory and then i do an DB/BUILD?flush=1, the DB/BUILD breaks when it reches the ImageGallery.. look here: http://salvadrive.biz/Unbenannt-1.jpg

site is working, but no new pagetype.. so i found the problem that DB/BUILD stops at ImageGallery.

I tried with an ss2.2.2 and with ss2.3, its the same error at both version.
the ss2.3 was on an other webserver, there the ss is in an subfolder, so i had to edit the "swfupload/_config.php" to

require_once($_SERVER['DOCUMENT_ROOT'] . "/MySubFolder/swfupload/code/SWFUploadFileIFrameField_Uploader.php");
require_once($_SERVER['DOCUMENT_ROOT'] . "/MySubFolder/swfupload/code/SWFUploadFileIFrameField.php");

but after there was no error ecxept the same error like with the ss.2.2.2 that building db stops at imagegallery..

hmmm..

can you help me?

Posted to: Image Gallery Extension: Testers Needed Show Thread | Post Reply

Re: How to do a <= check in template

jam13 — Tue, 16 Dec 2008 03:29:41 +1300

If <= works (which I'm not sure of) then it would be:

<% if Pos <= 4 %>

i.e. without the $

If not, and $Pos is an integer, can't you do < 5?

Posted to: How to do a <= check in template Show Thread | Post Reply

Re: Theme is not working/showing

JSD1985 — Tue, 16 Dec 2008 03:06:27 +1300

Hi,

It's working. I deleted the file, made a new one on my computer and uploaded the new file and it seems to work. Thanks!

Posted to: Theme is not working/showing Show Thread | Post Reply

Re: Theme is not working/showing

SalvaStripe — Tue, 16 Dec 2008 02:42:17 +1300

make sure your "new theme" does not look like the blackcandy theme

make sure, that your _config.php is realy changed. when i set up new sites, i have to delete the _config.php in webserver, then I edit the _config.php local at my pc and reupload it. then my config is changed :S

look that your CSS urls are correctly.. (not like "../themes/blackcandy/..")

Posted to: Theme is not working/showing Show Thread | Post Reply

How to do a <= check in template

Sec — Tue, 16 Dec 2008 02:37:41 +1300

Hello.

I would like to do a test like this:

<% if $Pos <= 4 %>
...

Is this possible in the ss template?

Posted to: How to do a <= check in template Show Thread | Post Reply

Theme is not working/showing

JSD1985 — Tue, 16 Dec 2008 02:27:02 +1300

Hello,

I've uploaded a new theme in the 'Themes' folder and I changes the _config.php file.
Anyway, I still see my old theme!

How can I change it?

The URL of the website is:

http://www.jsdstudios.nl/website/SilverStripe

and I entered this URL:

http://www.jsdstudios.nl/website/SilverStripe?flush=1

But I still see the original style.

How can I change the theme?

Greetings,
Jeroen

Posted to: Theme is not working/showing Show Thread | Post Reply

tinymce image : original size

erwanpia — Tue, 16 Dec 2008 02:26:57 +1300

Hi,
while working on the original / vs resampled image hack, I implemented another quick hack that allows editors to automatically let big images take their original size in the tinymce image panel, instead of the maximum 600 limit set in ThumbnailStripField.php

everything is described here, let me know if it useful for you

Posted to: tinymce image : original size Show Thread | Post Reply

Re: ModelAdmin user error

jam13 — Tue, 16 Dec 2008 01:38:15 +1300

Think your problem might be here:

static $allowed_children = array( 'Product' );

Product is not derived from SiteTree, so I don't think this will work.

Posted to: ModelAdmin user error Show Thread | Post Reply

tinymce.template.js - Add "onclick" for "a" ???

SalvaStripe — Tue, 16 Dec 2008 01:35:05 +1300

hey..
in file tinymce.template.js I can add for example "style" for the div tag, so when i write

<div style="margin:0;">hello</div>

the editor dont removes the "style" code. with the default file there would be

<div>hello</div>

in the HTML after "Update".

soo.. i want to add the ONCLICK for my "a" tags:

<a href="#" onclick="openPopup('http://mypage.com');">Open Popup</a>

but the editor removes the "onclick" in my code.. i did add the onclick in the tinymce.template.js file, but it did not work
i could hard code it in the ".ss" file, but i need this "a-tag" with onclick in my content, what will be loaded in the .ss file..

so.. someone can help me?

valid_elements:
"+a[id|rel|rev|dir|onclick|tabindex|accesskey|type|name|href|target|title|class],
-strong/-b[class],
-em/-i[class],
-strike[class],
-u[class],
#p[id|dir|class|align],
-ol[class],
-ul[class],
-li[class],
br,
img[id|dir|longdesc|usemap|class|src|border|alt=|title|width|height|align],
-sub[class],
-sup[class],
-blockquote[dir|class],
-table[border=0|cellspacing|cellpadding|width|height|class|align|summary|dir|id|style],
-tr[id|dir|class|rowspan|width|height|align|valign|bgcolor|background|bordercolor|style],
tbody[id|class|style],thead[id|class|style],
tfoot[id|class|style],
-td[id|dir|class|colspan|rowspan|width|height|align|valign|scope|style],
-th[id|dir|class|colspan|rowspan|width|height|align|valign|scope|style],
caption[id|dir|class],
-div[id|dir|class|align|style],
-span[class|align],
-pre[class|align],
address[class|align],
-h1[id|dir|class|align],
-h2[id|dir|class|align],
-h3[id|dir|class|align],
-h4[id|dir|class|align],
-h5[id|dir|class|align],
-h6[id|dir|class|align],
hr[class],
dd[id|class|title|dir],
dl[id|class|title|dir],
dt[id|class|title|dir]",
extended_valid_elements :
"img[class|src|alt|title|hspace|vspace|width|height|align|onmouseover|onmouseout|name]"
});

Posted to: tinymce.template.js - Add "onclick" for "a" ??? Show Thread | Post Reply

Re: Fasthosts

DarkHorse — Tue, 16 Dec 2008 01:04:58 +1300

Hi Gareth.

Please can you help.

I think I'm suffering similar problems to you attempting to install SilverStripe on a Fasthosts Linux server. (150mb MySQL for Linux DB)

Would it be possible to ask how you managed to solve your problem.

Below are the Requirements I'm failing on:

1. Is the .htaccess file writeable?
User 'domain???' needs to be able to write to this file:
.htaccess

2. Server software
I can't tell what webserver you are running.
Without Apache I can't tell if mod_rewrite is enabled.

3. mod_rewrite enabled
I can't tell whether mod_rewrite is running.
You may need to configure a rewriting rule yourself.

Any help would be very much appreciated.

Thanks in advance, DH.

Posted to: Fasthosts Show Thread | Post Reply

ModelAdmin user error

howardgrigg — Tue, 16 Dec 2008 00:35:00 +1300

Hi guys,

I am looking into how to use modeladmin now that there is some documentation to it.

I have done a clean install from the 2.3 branch then created 3 files in mysite/code:

ProductsHolder.php

<?php
class ProductsHolder extends Page {
static $allowed_children = array( 'Product' );
}

class ProductsHolder_Controller extends Page_Controller {
}
?>

Product.php

<?php

class Product extends DataObject {

static $db = array(
'Name' => 'Varchar',
'ProductCode' => 'Varchar',
'Description' => 'Text'
);

static $has_one = array(
'Category' => 'Category'
);

static $searchable_fields = array(
'Name',
'ProductCode'
);

}

and MyCatalogAdmin.php

<?php

class MyCatalogAdmin extends ModelAdmin {

protected static $managed_models = array(
'Product'
);

static $url_segment = 'products'; // will be linked as /admin/products
static $menu_title = 'My Product Admin';

}

After db build I log into the admin and am able to select "My Product Admin" which then appears to load fine until I click on "Create 'Product'" it shows an error message:

Error: "Bad class to singleton() - Category" at line 263 of /Users/Howard/Desktop/localhost/jdmnz/sapphire/core/Core.php

the line from core.php in question reads:

if(!class_exists($className)) user_error("Bad class to singleton() - $className", E_USER_ERROR);

Any help would be greatly appreciated!

Posted to: ModelAdmin user error Show Thread | Post Reply

SVN asking for password on sapphire update/checkout

lubzee — Tue, 16 Dec 2008 00:08:38 +1300

When I tried updating my SVN working copy today I got asked for a password when it pulled the sapphire module.

I've never had to enter any login details? Did something change?

Posted to: SVN asking for password on sapphire update/checkout Show Thread | Post Reply

Re: Greyscaling and resizing images not working?

ajshort — Mon, 15 Dec 2008 23:34:24 +1300

I had a quick look at the GD class - some functions do create a new instance, others don't. Maybe try:

public function generateLogoH30Grey(GD $gd) {
   $gd = $gd->PaddedResize(70, 30)->greyscale();
   $gd->setQuality(100);

   return $gd;
}

Posted to: Greyscaling and resizing images not working? Show Thread | Post Reply

Re: Greyscaling and resizing images not working?

blueskies — Mon, 15 Dec 2008 23:17:00 +1300

Thanks for your reply, ajshort!

That is a very good point, and when I read your post I thought, "Duh! That's it!". But unfortunately I'm getting even bigger problems when chaining:
Fatal error: Call to a member function paddedResize() on a non-object

So, that's not the solution, or the syntax of the chaining is incorrect.

By the way, the one $gd per line style is according to the docs: http://doc.silverstripe.com/doku.php?id=imageupload (under the 'More advanced uses' heading, there's an example).

Posted to: Greyscaling and resizing images not working? Show Thread | Post Reply

Re: Greyscaling and resizing images not working?

ajshort — Mon, 15 Dec 2008 23:05:47 +1300

I think your problem may be that your changes are not carried over to the next line of code - each of these methods return a new instance of the GD class rather than modifying the existing one. Have you tried chaining your methods together?

public function generateLogoH30Grey($gd) {
return $gd->setQuality(100)->paddedResize(70, 30)->greyscale();
}

Posted to: Greyscaling and resizing images not working? Show Thread | Post Reply