Jump to:

4906 Posts in 7105 Topics by 1474 members

Installing SilverStripe

SilverStripe Forums » Installing SilverStripe » RC 2.3.0 - Friendly URLs error

Getting SilverStripe up and running on your computer and on your web server.

Moderators: martimiz, Sean, biapar, Willr, Ingo, swaiba, simon_w

Page: 1
Go to End
Author Topic: 4941 Views
  • Gringa
    Community Member
    11 Posts

    RC 2.3.0 - Friendly URLs error Link to this post

    I'm installing 2.3.0 as a fresh install (deleted 2.2 databases and all files from my Unix hosting account at A Small Orangethe installation runs smoothly until the installer checks that friendly URLs are working. I then get an error that indicates that they are not working I should check that mod_rewrite and OverrideAll are enabled. I've checked with A Small Orange and we checked the .htaccess file and ensured that both were running. I tried again (and again and again) but I still get the same error. Anyone else run across this? What's the fix?

    The error message reads:
    Installing SilverStripe...

    I am now running through the installation steps (this should take about 30 seconds)

    If you receive a fatal error, refresh this page to continue the installation

    * Creating 'mysite/_config.php'...
    * Creating /home/public_html/mysite/_config.php
    * Creating '.htaccess' file...
    * Creating /home/public_html/.htaccess
    * Building database schema...
    * Checking that friendly URLs work...
    * Friendly URLs are not working. This is most likely because mod_rewrite isn't configured correctly on your site. Please check the following things in your Apache configuration; you may need to get your web host or server administrator to do this for you:
    o mod_rewrite is enabled
    o AllowOverride All is set for your directory

    My .htaccess file in my root hosting directory reads:

    #AllowOverride All
    RewriteEngine On
    # Use PHP5 as default
    AddHandler application/x-httpd-php5 .php

    The .htaccess file in the public_html directory where SilverStripe is being installed reads:

    #allow custom php settings in suphp
    suPHP_ConfigPath /home/macon/public_html/aeolus/

    <Files *.ss>
    Order deny,allow
    Deny from all
    Allow from

    <IfModule mod_rewrite.c>
    RewriteEngine On
    RewriteBase /

    RewriteCond %{REQUEST_URI} !(\.gif)|(\.jpg)|(\.png)|(\.css)|(\.js)|(\.php)$

    RewriteCond %{REQUEST_URI} ^(.*)$
    RewriteCond %{REQUEST_FILENAME} !-f
    RewriteRule .* sapphire/main.php?url=%1&%{QUERY_STRING} [L]

    Thanks in advance for any advice!

  • Gringa
    Community Member
    11 Posts

    Re: RC 2.3.0 - Friendly URLs error Link to this post

    PHP.ini reads:

    ; Enable the PHP scripting language engine under Apache.
    engine = On

    ; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
    zend.ze1_compatibility_mode = Off

    ; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
    ; NOTE: Using short tags should be avoided when developing applications or
    ; libraries that are meant for redistribution, or deployment on PHP
    ; servers which are not under your control, because short tags may not
    ; be supported on the target server. For portable, redistributable code,
    ; be sure not to use short tags.
    short_open_tag = On

    ; Allow ASP-style <% %> tags.
    asp_tags = Off

    ; The number of significant digits displayed in floating point numbers.
    precision = 12

    ; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
    y2k_compliance = On

    ; Output buffering allows you to send header lines (including cookies) even
    ; after you send body content, at the price of slowing PHP's output layer a
    ; bit. You can enable output buffering during runtime by calling the output
    ; buffering functions. You can also enable output buffering for all files by
    ; setting this directive to On. If you wish to limit the size of the buffer
    ; to a certain size - you can use a maximum number of bytes instead of 'On', as
    ; a value for this directive (e.g., output_buffering=4096).
    output_buffering = Off

    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using ob_start().
    ; Using this ini directive may cause problems unless you know what script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ;output_handler =

    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    zlib.output_compression = Off
    ;zlib.output_compression_level = -1

    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ;zlib.output_handler =

    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling the
    ; PHP function flush() after each and every call to print() or echo() and each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    implicit_flush = Off

    ; The unserialize callback function will be called (with the undefined class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instantiated.
    ; A warning appears if the specified function is not defined, or if the
    ; function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.

    ; When floats & doubles are serialized store serialize_precision significant
    ; digits after the floating point. The default value ensures that when floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 100

    ; Whether to enable the ability to force arguments to be passed by reference
    ; at function call time. This method is deprecated and is likely to be
    ; unsupported in future versions of PHP/Zend. The encouraged method of
    ; specifying which arguments should be passed by reference is in the function
    ; declaration. You're encouraged to try and turn this option Off and make
    ; sure your scripts work properly with it in order to ensure they will work
    ; with future versions of the language (you will receive a warning each time
    ; you use this feature, and the argument will be passed by value instead of by
    ; reference).
    allow_call_time_pass_reference = On

    ; Safe Mode
    safe_mode = Off

    ; By default, Safe Mode does a UID compare check when
    ; opening files. If you want to relax this to a GID compare,
    ; then turn on safe_mode_gid.
    safe_mode_gid = Off

    ; When safe_mode is on, UID/GID checks are bypassed when
    ; including files from this directory and its subdirectories.
    ; (directory must also be in include_path or full path must
    ; be used when including)
    safe_mode_include_dir =

    ; When safe_mode is on, only executables located in the safe_mode_exec_dir
    ; will be allowed to be executed via the exec family of functions.
    safe_mode_exec_dir =

    ; Setting certain environment variables may be a potential security breach.
    ; This directive contains a comma-delimited list of prefixes. In Safe Mode,
    ; the user may only alter environment variables whose names begin with the
    ; prefixes supplied here. By default, users will only be able to set
    ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
    ; Note: If this directive is empty, PHP will let the user modify ANY
    ; environment variable!
    safe_mode_allowed_env_vars = PHP_

    ; This directive contains a comma-delimited list of environment variables that
    ; the end user won't be able to change using putenv(). These variables will be
    ; protected even if safe_mode_allowed_env_vars is set to allow to change them.
    safe_mode_protected_env_vars = LD_LIBRARY_PATH

    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ;open_basedir =

    ; This directive allows you to disable certain functions for security reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_functions =

    ; This directive allows you to disable certain classes for security reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_classes =

    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <span style="color: ???????"> would work.
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.bg = #FFFFFF
    ;highlight.default = #0000BB
    ;highlight.html = #000000

    ; If enabled, the request will be allowed to complete even if the user aborts
    ; the request. Consider enabling it if executing long request, which may end up
    ; being interrupted by the user or a browser timing out.
    ; ignore_user_abort = On

    ; Determines the size of the realpath cache to be used by PHP. This value should
    ; be increased on systems where PHP opens many files to reflect the quantity of
    ; the file operations performed.
    ; realpath_cache_size=16k

    ; Duration of time, in seconds for which to cache realpath information for a given
    ; file or directory. For systems with rarely changing files, consider increasing this
    ; value.
    ; realpath_cache_ttl=120

    ; Misc
    ; Decides whether PHP may expose the fact that it is installed on the server
    ; (e.g. by adding its signature to the Web server header). It is no security
    ; threat in any way, but it makes it possible to determine whether you use PHP
    ; on your server or not.
    expose_php = On

    ; Resource Limits ;

    max_execution_time = 30 ; Maximum execution time of each script, in seconds
    max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
    ;max_input_nesting_level = 64 ; Maximum input variable nesting level
    memory_limit = 128M ; Maximum amount of memory a script may consume (128MB)

    ; Error handling and logging ;

    ; error_reporting is a bit-field. Or each number up to get desired error
    ; reporting level
    ; E_ALL - All errors and warnings (doesn't include E_STRICT)
    ; E_ERROR - fatal run-time errors
    ; E_RECOVERABLE_ERROR - almost fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often result
    ; from a bug in your code, but it's possible that it was
    ; intentional (e.g., using an uninitialized variable and
    ; relying on the fact it's automatically initialized to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; Examples:
    ; - Show all errors, except for notices and coding standards warnings
    ;error_reporting = E_ALL & ~E_NOTICE
    ; - Show all errors, except for notices
    ;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
    ; - Show only errors
    ; - Show all errors except for notices and coding standards warnings
    error_reporting = E_ALL & ~E_NOTICE

    ; Print out errors (as a part of the output). For production web sites,
    ; you're strongly encouraged to turn this feature off, and use error logging
    ; instead (see below). Keeping display_errors enabled on a production web site
    ; may reveal security information to end users, such as file paths on your Web
    ; server, your database schema or other information.
    display_errors = On

    ; Even when display_errors is on, errors that occur during PHP's startup
    ; sequence are not displayed. It's strongly recommended to keep
    ; display_startup_errors off, except for when debugging.
    display_startup_errors = On

    ; Log errors into a log file (server-specific log, stderr, or error_log (below))
    ; As stated above, you're strongly advised to use error logging in place of
    ; error displaying on production web sites.
    log_errors = On

    ; Set maximum length of log_errors. In error_log information about the source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
    log_errors_max_len = 1024

    ; Do not log repeated messages. Repeated errors must occur in same file on same
    ; line until ignore_repeated_source is set true.
    ignore_repeated_errors = Off

    ; Ignore source of message when ignoring repeated messages. When this setting
    ; is On you will not log errors with repeated messages from different files or
    ; source lines.
    ignore_repeated_source = Off

    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    report_memleaks = On

    ;report_zend_debug = 0

    ; Store the last error/warning message in $php_errormsg (boolean).
    track_errors = Off

    ; Disable the inclusion of HTML tags in error messages.
    ; Note: Never use this feature for production boxes.
    ;html_errors = Off

    ; If html_errors is set On PHP produces clickable error messages that direct
    ; to a page describing the error or function causing the error in detail.
    ; You can download a copy of the PHP manual from http://www.php.net/docs.php
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used including
    ; the dot.
    ; Note: Never use this feature for production boxes.
    ;docref_root = "/phpmanual/"
    ;docref_ext = .html

    ; String to output before an error message.
    ;error_prepend_string = "<font color=ff0000>"

    ; String to output after an error message.
    ;error_append_string = "</font>"

    ; Log errors to specified file.
    ;error_log = filename

    ; Log errors to syslog (Event Log on NT, not valid in Windows 95).
    ;error_log = syslog

    ; Data Handling ;
    ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3

    ; The separator used in PHP generated URLs to separate arguments.
    ; Default is "&".
    ;arg_separator.output = "&"

    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; Default is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ;arg_separator.input = ";&"

    ; This directive describes the order in which PHP registers GET, POST, Cookie,
    ; Environment and Built-in variables (G, P, C, E & S respectively, often
    ; referred to as EGPCS or GPC). Registration is done from left to right, newer
    ; values override older values.
    variables_order = "EGPCS"

    ; Whether or not to register the EGPCS variables as global variables. You may
    ; want to turn this off if you don't want to clutter your scripts' global scope
    ; with user data. This makes most sense when coupled with track_vars - in which
    ; case you can access all of the GPC variables through the $HTTP_*_VARS[],
    ; variables.
    ; You should do your best to write your scripts so that they do not require
    ; register_globals to be on; Using form variables as globals can easily lead
    ; to possible security problems, if the code is not very well thought of.
    register_globals = Off

    ; Whether or not to register the old-style input arrays, HTTP_GET_VARS
    ; and friends. If you're not using them, it's recommended to turn them off,
    ; for performance reasons.
    register_long_arrays = On

    ; This directive tells PHP whether to declare the argv&argc variables (that
    ; would contain the GET information). If you don't use these variables, you
    ; should turn it off for increased performance.
    register_argc_argv = On

    ; When enabled, the SERVER and ENV variables are created when they're first
    ; used (Just In Time) instead of when the script starts. If these variables
    ; are not used within a script, having this directive on will result in a
    ; performance gain. The PHP directives register_globals, register_long_arrays,
    ; and register_argc_argv must be disabled for this directive to have any affect.
    auto_globals_jit = On

    ; Maximum size of POST data that PHP will accept.
    post_max_size = 8M

    ; Magic quotes

    ; Magic quotes for incoming GET/POST/Cookie data.
    magic_quotes_gpc = On

    ; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
    magic_quotes_runtime = Off

    ; Use Sybase-style magic quotes (escape ' with '' instead of \').
    magic_quotes_sybase = Off

    ; Automatically add files before or after any PHP document.
    auto_prepend_file =
    auto_append_file =

    ; As of 4.0b4, PHP always outputs a character encoding by default in
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    default_mimetype = "text/html"
    ;default_charset = "iso-8859-1"

    ; Always populate the $HTTP_RAW_POST_DATA variable.
    ;always_populate_raw_post_data = On

    ; Paths and Directories ;

    ; UNIX: "/path1:/path2"
    ;include_path = ".:/php/includes"
    ; Windows: "\path1;\path2"
    ;include_path = ".;c:\php\includes"

    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below
    doc_root =

    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    user_dir =

    ; Directory in which the loadable extensions (modules) reside.
    extension_dir = "./"

    ; Whether or not to enable the dl() function. The dl() function does NOT work
    ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
    ; disabled on them.
    enable_dl = On

    ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; cgi.force_redirect = 1

    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request.
    ; cgi.nph = 1

    ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
    ; will look for to know it is OK to continue execution. Setting this variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; cgi.redirect_status_env = ;

    ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
    ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
    ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
    ; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
    ; of zero causes PHP to behave as before. Default is zero. You should fix your scripts
    ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
    ; cgi.fix_pathinfo=0

    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; fastcgi.impersonate = 1;

    ; Disable logging through FastCGI connection
    ; fastcgi.log = 0

    ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ;cgi.rfc2616_headers = 0

    ; File Uploads ;

    ; Whether to allow HTTP file uploads.
    file_uploads = On

    ; Temporary directory for HTTP uploaded files (will use system default if not
    ; specified).
    ;upload_tmp_dir =

    ; Maximum allowed size for uploaded files.
    upload_max_filesize = 10M
    memory_limit = 64M

    ; Fopen wrappers ;

    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    allow_url_fopen = On

    ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
    allow_url_include = Off

    ; Define the anonymous ftp password (your email address)

    ; Define the User-Agent string
    ; user_agent="PHP"

    ; Default timeout for socket based streams (seconds)
    default_socket_timeout = 60

    ; If your scripts have to deal with files from Macintosh systems,
    ; or you are running on a Mac and need to deal with files from
    ; unix or win32 systems, setting this flag will cause PHP to
    ; automatically detect the EOL character in those files so that
    ; fgets() and file() will work regardless of the source of the file.
    ; auto_detect_line_endings = Off

    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, on Windows:
    ; extension=msql.dll
    ; ... or under UNIX:
    ; extension=msql.so
    ; Note that it should be the name of the module only; no directory information
    ; needs to go here. Specify the location of the extension with the
    ; extension_dir directive above.

    ; Windows Extensions
    ; Note that ODBC support is built in, so no dll is needed for it.
    ; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
    ; extension folders as well as the separate PECL DLL download (PHP 5).
    ; Be sure to appropriately set the extension_dir directive.


    ; Module Settings ;

    ; Defines the default timezone used by the date functions
    ;date.timezone =

    ;date.default_latitude = 31.7667
    ;date.default_longitude = 35.2333

    ;date.sunrise_zenith = 90.583333
    ;date.sunset_zenith = 90.583333

    ;filter.default = unsafe_raw
    ;filter.default_flags =

    ;iconv.input_encoding = ISO-8859-1
    ;iconv.internal_encoding = ISO-8859-1
    ;iconv.output_encoding = ISO-8859-1

    ;sqlite.assoc_case = 0

    ;xmlrpc_error_number = 0
    ;xmlrpc_errors = 0

    ;PCRE library backtracking limit.

    ;PCRE library recursion limit.
    ;Please note that if you set this value to a high number you may consume all
    ;the available process stack and eventually crash PHP (due to reaching the
    ;stack size limit imposed by the Operating System).

    ; Whether or not to define the various syslog variables (e.g. $LOG_PID,
    ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
    ; runtime, you can define these variables by calling define_syslog_variables().
    define_syslog_variables = Off

    [mail function]
    ; For Win32 only.
    SMTP = localhost
    smtp_port = 25

    ; For Win32 only.
    ;sendmail_from = me@example.com

    ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
    ;sendmail_path =

    ; Force the addition of the specified parameters to be passed as extra parameters
    ; to the sendmail binary. These parameters will always replace the value of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =

    sql.safe_mode = Off

    ;odbc.default_db = Not yet implemented
    ;odbc.default_user = Not yet implemented
    ;odbc.default_pw = Not yet implemented

    ; Allow or prevent persistent links.
    odbc.allow_persistent = On

    ; Check that a connection is still valid before reuse.
    odbc.check_persistent = On

    ; Maximum number of persistent links. -1 means no limit.
    odbc.max_persistent = -1

    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    odbc.max_links = -1

    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    odbc.defaultlrl = 4096

    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
    ; of uodbc.defaultlrl and uodbc.defaultbinmode
    odbc.defaultbinmode = 1

    ; Allow or prevent persistent links.
    mysql.allow_persistent = On

    ; Maximum number of persistent links. -1 means no limit.
    mysql.max_persistent = -1

    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    mysql.max_links = -1

    ; Default port number for mysql_connect(). If unset, mysql_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
    ; at MYSQL_PORT.
    mysql.default_port =

    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysql.default_socket =

    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysql.default_host =

    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysql.default_user =

    ; Default password for mysql_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysql.default_password =

    ; Maximum time (in seconds) for connect timeout. -1 means no limit
    mysql.connect_timeout = 60

    ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
    ; SQL-Errors will be displayed.
    mysql.trace_mode = Off


    ; Maximum number of links. -1 means no limit.
    mysqli.max_links = -1

    ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
    ; at MYSQL_PORT.
    mysqli.default_port = 3306

    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysqli.default_socket =

    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_host =

    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_user =

    ; Default password for mysqli_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysqli.default_pw =

    ; Allow or prevent reconnect
    mysqli.reconnect = Off

    ; Allow or prevent persistent links.
    msql.allow_persistent = On

    ; Maximum number of persistent links. -1 means no limit.
    msql.max_persistent = -1

    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    msql.max_links = -1

    ; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
    ;oci8.privileged_connect = Off

    ; Connection: The maximum number of persistent OCI8 connections per
    ; process. Using -1 means no limit.
    ;oci8.max_persistent = -1

    ; Connection: The maximum number of seconds a process is allowed to
    ; maintain an idle persistent connection. Using -1 means idle
    ; persistent connections will be maintained forever.
    ;oci8.persistent_timeout = -1

    ; Connection: The number of seconds that must pass before issuing a
    ; ping during oci_pconnect() to check the connection validity. When
    ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
    ; pings completely.
    ;oci8.ping_interval = 60

    ; Tuning: This option enables statement caching, and specifies how
    ; many statements to cache. Using 0 disables statement caching.
    ;oci8.statement_cache_size = 20

    ; Tuning: Enables statement prefetching and sets the default number of
    ; rows that will be fetched automatically after statement execution.
    ;oci8.default_prefetch = 10

    ; Compatibility. Using On means oci_close() will not close
    ; oci_connect() and oci_new_connect() connections.
    ;oci8.old_oci_close_semantics = Off

    ; Allow or prevent persistent links.
    pgsql.allow_persistent = On

    ; Detect broken persistent links always with pg_pconnect().
    ; Auto reset feature requires a little overheads.
    pgsql.auto_reset_persistent = Off

    ; Maximum number of persistent links. -1 means no limit.
    pgsql.max_persistent = -1

    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    pgsql.max_links = -1

    ; Ignore PostgreSQL backends Notice message or not.
    ; Notice message logging require a little overheads.
    pgsql.ignore_notice = 0

    ; Log PostgreSQL backends Noitce message or not.
    ; Unless pgsql.ignore_notice=0, module cannot log notice message.
    pgsql.log_notice = 0

    ; Allow or prevent persistent links.
    sybase.allow_persistent = On

    ; Maximum number of persistent links. -1 means no limit.
    sybase.max_persistent = -1

    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybase.max_links = -1

    ;sybase.interface_file = "/usr/sybase/interfaces"

    ; Minimum error severity to display.
    sybase.min_error_severity = 10

    ; Minimum message severity to display.
    sybase.min_message_severity = 10

    ; Compatibility mode with old versions of PHP 3.0.
    ; If on, this will cause PHP to automatically assign types to results according
    ; to their Sybase type, instead of treating them all as strings. This
    ; compatibility mode will probably not stay around forever, so try applying
    ; whatever necessary changes to your code, and turn it off.
    sybase.compatability_mode = Off

    ; Allow or prevent persistent links.
    sybct.allow_persistent = On

    ; Maximum number of persistent links. -1 means no limit.
    sybct.max_persistent = -1

    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybct.max_links = -1

    ; Minimum server message severity to display.
    sybct.min_server_severity = 10

    ; Minimum client message severity to display.
    sybct.min_client_severity = 10

    ; Number of decimal digits for all bcmath functions.
    bcmath.scale = 0

    ;browscap = extra/browscap.ini

    ; Default host for ifx_connect() (doesn't apply in safe mode).
    ifx.default_host =

    ; Default user for ifx_connect() (doesn't apply in safe mode).
    ifx.default_user =

    ; Default password for ifx_connect() (doesn't apply in safe mode).
    ifx.default_password =

    ; Allow or prevent persistent links.
    ifx.allow_persistent = On

    ; Maximum number of persistent links. -1 means no limit.
    ifx.max_persistent = -1

    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ifx.max_links = -1

    ; If on, select statements return the contents of a text blob instead of its id.
    ifx.textasvarchar = 0

    ; If on, select statements return the contents of a byte blob instead of its id.
    ifx.byteasvarchar = 0

    ; Trailing blanks are stripped from fixed-length char columns. May help the
    ; life of Informix SE users.
    ifx.charasvarchar = 0

    ; If on, the contents of text and byte blobs are dumped to a file instead of
    ; keeping them in memory.
    ifx.blobinfile = 0

    ; NULL's are returned as empty strings, unless this is set to 1. In that case,
    ; NULL's are returned as string 'NULL'.
    ifx.nullformat = 0

    ; Handler used to store/retrieve data.
    session.save_handler = files

    ; Argument passed to save_handler. In the case of files, this is the path
    ; where data files are stored. Note: Windows users have to change this
    ; variable in order to use PHP's session functions.
    ; As of PHP 4.0.1, you can define the path as:
    ; session.save_path = "N;/path"
    ; where N is an integer. Instead of storing all the session files in
    ; /path, what this will do is use subdirectories N-levels deep, and
    ; store the session data in those directories. This is useful if you
    ; or your OS have problems with lots of files in one directory, and is
    ; a more efficient layout for servers that handle lots of sessions.
    ; NOTE 1: PHP will not create this directory structure automatically.
    ; You can use the script in the ext/session dir for that purpose.
    ; NOTE 2: See the section on garbage collection below if you choose to
    ; use subdirectories for session storage
    ; The file storage module creates files using mode 600 by default.
    ; You can change that by using
    ; session.save_path = "N;MODE;/path"
    ; where MODE is the octal representation of the mode. Note that this
    ; does not overwrite the process's umask.
    ;session.save_path = "/tmp"

    ; Whether to use cookies.
    session.use_cookies = 1

    ;session.cookie_secure =

    ; This option enables administrators to make their users invulnerable to
    ; attacks which involve passing session ids in URLs; defaults to 0.
    ; session.use_only_cookies = 1

    ; Name of the session (used as cookie name).
    session.name = PHPSESSID

    ; Initialize session on request startup.
    session.auto_start = 0

    ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
    session.cookie_lifetime = 0

    ; The path for which the cookie is valid.
    session.cookie_path = /

    ; The domain for which the cookie is valid.
    session.cookie_domain =

    ; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
    session.cookie_httponly =

    ; Handler used to serialize data. php is the standard serializer of PHP.
    session.serialize_handler = php

    ; Define the probability that the 'garbage collection' process is started
    ; on every session initialization.
    ; The probability is calculated by using gc_probability/gc_divisor,
    ; e.g. 1/100 means there is a 1% chance that the GC process starts
    ; on each request.

    session.gc_probability = 1
    session.gc_divisor = 100

    ; After this number of seconds, stored data will be seen as 'garbage' and
    ; cleaned up by the garbage collection process.
    session.gc_maxlifetime = 1440

    ; NOTE: If you are using the subdirectory option for storing session files
    ; (see session.save_path above), then garbage collection does *not*
    ; happen automatically. You will need to do your own garbage
    ; collection through a shell script, cron entry, or some other method.
    ; For example, the following script would is the equivalent of
    ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
    ; cd /path/to/sessions; find -cmin +24 | xargs rm

    ; PHP 4.2 and less have an undocumented feature/bug that allows you to
    ; to initialize a session variable in the global scope, albeit register_globals
    ; is disabled. PHP 4.3 and later will warn you, if this feature is used.
    ; You can disable the feature and the warning separately. At this time,
    ; the warning is only displayed, if bug_compat_42 is enabled.

    session.bug_compat_42 = 1
    session.bug_compat_warn = 1

    ; Check HTTP Referer to invalidate externally stored URLs containing ids.
    ; HTTP_REFERER has to contain this substring for the session to be
    ; considered as valid.
    session.referer_check =

    ; How many bytes to read from the file.
    session.entropy_length = 0

    ; Specified here to create the session id.
    session.entropy_file =

    ;session.entropy_length = 16

    ;session.entropy_file = /dev/urandom

    ; Set to {nocache,private,public,} to determine HTTP caching aspects
    ; or leave this empty to avoid sending anti-caching headers.
    session.cache_limiter = nocache

    ; Document expires after n minutes.
    session.cache_expire = 180

    ; trans sid support is disabled by default.
    ; Use of trans sid may risk your users security.
    ; Use this option with caution.
    ; - User may send URL contains active session ID
    ; to other person via. email/irc/etc.
    ; - URL that contains active session ID may be stored
    ; in publically accessible computer.
    ; - User may access your site with the same session ID
    ; always using URL stored in browser's history or bookmarks.
    session.use_trans_sid = 0

    ; Select a hash function
    ; 0: MD5 (128 bits)
    ; 1: SHA-1 (160 bits)
    session.hash_function = 0

    ; Define how many bits are stored in each character when converting
    ; the binary hash data to something readable.
    ; 4 bits: 0-9, a-f
    ; 5 bits: 0-9, a-v
    ; 6 bits: 0-9, a-z, A-Z, "-", ","
    session.hash_bits_per_character = 4

    ; The URL rewriter will look for URLs in a defined set of HTML tags.
    ; form/fieldset are special; if you include them here, the rewriter will
    ; add a hidden <input> field with the info which is otherwise appended
    ; to URLs. If you want XHTML conformity, remove the form entry.
    ; Note that all valid entries require a "=", even if no value follows.
    url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=,fieldset="

    ; Allow or prevent persistent links.
    mssql.allow_persistent = On

    ; Maximum number of persistent links. -1 means no limit.
    mssql.max_persistent = -1

    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    mssql.max_links = -1

    ; Minimum error severity to display.
    mssql.min_error_severity = 10

    ; Minimum message severity to display.
    mssql.min_message_severity = 10

    ; Compatibility mode with old versions of PHP 3.0.
    mssql.compatability_mode = Off

    ; Connect timeout
    ;mssql.connect_timeout = 5

    ; Query timeout
    ;mssql.timeout = 60

    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textlimit = 4096

    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textsize = 4096

    ; Limits the number of records in each batch. 0 = all records in one batch.
    ;mssql.batchsize = 0

    ; Specify how datetime and datetim4 columns are returned
    ; On => Returns data converted to SQL server settings
    ; Off => Returns values as YYYY-MM-DD hh:mm:ss
    ;mssql.datetimeconvert = On

    ; Use NT authentication when connecting to the server
    mssql.secure_connection = Off

    ; Specify max number of processes. -1 = library default
    ; msdlib defaults to 25
    ; FreeTDS defaults to 4096
    ;mssql.max_procs = -1

    ; Specify client character set.
    ; If empty or not set the client charset from freetds.comf is used
    ; This is only used when compiled with FreeTDS
    ;mssql.charset = "ISO-8859-1"

    ; Assert(expr); active by default.
    ;assert.active = On

    ; Issue a PHP warning for each failed assertion.
    ;assert.warning = On

    ; Don't bail out by default.
    ;assert.bail = Off

    ; User-function to be called if an assertion fails.
    ;assert.callback = 0

    ; Eval the expression with current error_reporting(). Set to true if you want
    ; error_reporting(0) around the eval().
    ;assert.quiet_eval = 0

    ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
    ;com.typelib_file =
    ; allow Distributed-COM calls
    ;com.allow_dcom = true
    ; autoregister constants of a components typlib on com_load()
    ;com.autoregister_typelib = true
    ; register constants casesensitive
    ;com.autoregister_casesensitive = false
    ; show warnings on duplicate constant registrations
    ;com.autoregister_verbose = true

    ; language for internal character representation.
    ;mbstring.language = Japanese

    ; internal/script encoding.
    ; Some encoding cannot work as internal encoding.
    ; (e.g. SJIS, BIG5, ISO-2022-*)
    ;mbstring.internal_encoding = EUC-JP

    ; http input encoding.
    ;mbstring.http_input = auto

    ; http output encoding. mb_output_handler must be
    ; registered as output buffer to function
    ;mbstring.http_output = SJIS

    ; enable automatic encoding translation according to
    ; mbstring.internal_encoding setting. Input chars are
    ; converted to internal encoding by setting this to On.
    ; Note: Do _not_ use automatic encoding translation for
    ; portable libs/applications.
    ;mbstring.encoding_translation = Off

    ; automatic encoding detection order.
    ; auto means
    ;mbstring.detect_order = auto

    ; substitute_character used when character cannot be converted
    ; one from another
    ;mbstring.substitute_character = none;

    ; overload(replace) single byte functions by mbstring functions.
    ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
    ; etc. Possible values are 0,1,2,4 or combination of them.
    ; For example, 7 for overload everything.
    ; 0: No overload
    ; 1: Overload mail() function
    ; 2: Overload str*() functions
    ; 4: Overload ereg*() functions
    ;mbstring.func_overload = 0

    ;fbsql.allow_persistent = On
    ;fbsql.autocommit = On
    ;fbsql.show_timestamp_decimals = Off
    ;fbsql.default_database =
    ;fbsql.default_database_password =
    ;fbsql.default_host =
    ;fbsql.default_password =
    ;fbsql.default_user = "_SYSTEM"
    ;fbsql.generate_warnings = Off
    ;fbsql.max_connections = 128
    ;fbsql.max_links = 128
    ;fbsql.max_persistent = -1
    ;fbsql.max_results = 128

    ; Tell the jpeg decode to libjpeg warnings and try to create
    ; a gd image. The warning will then be displayed as notices
    ; disabled by default
    ;gd.jpeg_ignore_warning = 0

    ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
    ; With mbstring support this will automatically be converted into the encoding
    ; given by corresponding encode setting. When empty mbstring.internal_encoding
    ; is used. For the decode settings you can distinguish between motorola and
    ; intel byte order. A decode setting cannot be empty.
    ;exif.encode_unicode = ISO-8859-15
    ;exif.decode_unicode_motorola = UCS-2BE
    ;exif.decode_unicode_intel = UCS-2LE
    ;exif.encode_jis =
    ;exif.decode_jis_motorola = JIS
    ;exif.decode_jis_intel = JIS

    ; The path to a default tidy configuration file to use when using tidy
    ;tidy.default_config = /usr/local/lib/php/default.tcfg

    ; Should tidy clean and repair output automatically?
    ; WARNING: Do not use this option if you are generating non-html content
    ; such as dynamic images
    tidy.clean_output = Off


    ; Local Variables:
    ; tab-width: 4
    ; End:

  • Gringa
    Community Member
    11 Posts

    Re: RC 2.3.0 - Friendly URLs error Link to this post

    If anyone else gets this error, here is the fix: Change PHP.ini to make sure that the below option is turned ON:

    ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
    allow_url_include = On

    By default it is generally turned off (if you are using the default file from php.org).

Page: 1
Go to Top

Want to know more about the company that brought you SilverStripe? Then check out SilverStripe.com

Comments on this website? Please give feedback.